Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

Water heater installation in Garnett, KS from All Seasons Air Conditioning and Heating delivers a comprehensive service from initial assessment to post-installation care. Our process covers choosing the right unit—tank, tankless, or hybrid—based on fuel availability, water quality, and space, plus pre-installation site evaluation, permits, and compliance. Our technicians perform safe old-unit removal, new piping, venting, gas and electrical connections, testing, and commissioning. Expect clear timelines, potential upgrades, warranty registration, and guidance on maintenance to extend equipment life and efficiency for long-term operation.

Schedule My Service

(785) 242-2602

Water Heater Installation in Garnett, KS

Replacing or installing a water heater is one of the most important home investments for comfort, safety, and energy savings. For homeowners in Garnett, KS, reliable hot water is essential during cold January mornings and for year-round chores. This page explains the professional water heater installation process from pre-installation assessment through warranty registration, what to expect during the job, and how local factors—like climate, fuel options, and water quality—affect your choice.

Why timely water heater installation matters in Garnett, KS

Cold winters in southeast Kansas increase demand for hot water, making underperforming units more noticeable.
Many Garnett homes are served by natural gas; some rural properties use propane or all-electric systems. Fuel availability affects unit selection and installation details.
Moderate to hard water in the region can accelerate scale buildup, reducing efficiency and lifespan unless mitigated during installation.

If your water heater is leaking, producing rusty water, failing to heat, or nearing 10–15 years old, an informed, code-compliant installation prevents property damage and improves efficiency.

Common installation types and typical issues in Garnett homes

Tank water heater replacement: straightforward swap when location, plumbing, and fuel type remain the same.
Tankless (on-demand) systems: popular for energy savings and endless hot water but often require upgraded gas lines or electrical service and new venting.
Hybrid heat pump units: highly efficient for electric homes but need adequate attic or garage space and clearance.
Fuel conversion or relocation: switching from electric to gas, propane hookup, or moving unit to a different location adds complexity and requires additional permits.

Common issues found during installations: corroded venting, undersized gas lines, insufficient electrical capacity, T&P drain problems, and scale buildup in older tanks.

Pre-installation site assessment

A thorough site assessment identifies constraints and optimizes the installation plan. Expect evaluation of:

Space and clearance: footprint, ceiling height, and access for removal and delivery.
Venting routes and combustion air: existing chimney or flue condition, direct-vent options, and clearance to combustibles.
Fuel supply: gas line diameter and pressure, propane tank proximity, or electrical panel capacity and breaker sizing for electric/tankless units.
Plumbing condition: existing risers, copper/PEX compatibility, and floor drain or pan requirements.
Structural support and drainage: floor rating for large tanks and placement of T&P discharge piping.

Based on the assessment, installers recommend unit size, fuel type, and any necessary upgrades such as gas line upsizing or electrical subpanel work.

Unit selection advice for Garnett homeowners

Capacity rules of thumb: 40–50 gallons for 1–3 people, 50–80 gallons for larger households. Consider first hour rating and recovery rates for high-demand homes.
Tank vs tankless: tanks are lower upfront cost and simpler to install; tankless offer lower operating costs and compact size but need correct gas/electrical infrastructure.
Efficiency: look at UEF (uniform energy factor) for tanks and AFUE/energy ratings for condensing units. High-efficiency units may require condensate drains and special venting.
Fuel considerations: natural gas typically lowers operating cost in Garnett if available; propane and electric options are viable where gas is absent.
Hard water mitigation: consider a water softener or a sacrificial anode specification if you have hard water to extend the heater lifespan.

Plumbing, electrical, and venting work you should expect

Safe removal of the old unit: drain, disconnect gas and electrical, and cap lines as required.
New piping connections: supply and return lines, isolation valves, thermal expansion tank installation if needed, and T&P valve with proper discharge routing.
Gas work: correct line sizing, leak testing, and installation of shutoff valves. Upgrading regulators or piping may be necessary for tankless units.
Electrical work: dedicated breakers, proper wire gauge, and ground bonding for electric or hybrid systems. Tankless units may require significant amperage.
Venting: installation of appropriate vent material and terminations, draft testing, and providing combustion air if required. High-efficiency condensing units need condensate management.

All work follows plumbing and mechanical codes to ensure safe operation.

Code, permits, and inspections

Most water heater installations require a permit and inspection from the city of Garnett or Anderson County. Common permit requirements include:

Plumbing or mechanical permit for the new heater and venting.
Gas permit for new gas lines or regulators.
Electrical permit for significant panel or wiring changes.

A licensed installer typically pulls permits and schedules inspections. Expect an inspector to verify safe venting, correct discharge piping, proper gas and electrical connections, and compliance with local code clearances.

Testing and commissioning procedures

After installation the technician will:

Fill the tank and purge air from hot water lines.
Test for leaks at all joints and valves.
Perform gas pressure and combustion checks and verify proper ignition.
Confirm venting draft and check for hazardous exhaust or CO issues.
Set water temperature and explain thermostat operation and safety settings.
Run hot water at fixtures to confirm adequate flow and temperature consistency.

Technicians should leave documentation showing settings and maintenance recommendations.

Typical installation timelines

Straight swap (same location and fuel): 3 to 6 hours.
Tankless or high-efficiency upgrades requiring new venting or fuel/electrical upgrades: one to two days.
Relocations or major plumbing/gas/electrical work: could extend to several days and permit inspections may add additional scheduling days.

Plan for limited hot water availability during the work and possible brief outages of gas or electricity.

Post-installation care and warranty registration

First-year maintenance: inspect for leaks, check T&P valve operation, and verify venting clearances.
Routine maintenance: flush tank annually or semi-annually if water is hard, inspect anode rod every 2–3 years, and service burners or heat exchangers as recommended.
Warranty registration: register the unit promptly with the manufacturer and keep installation documentation and receipts. Warranties often require professional installation to remain valid.

How to prepare your home

Clear access to the water heater area and remove obstacles or valuables nearby.
Ensure safe parking and access for service vehicles.
Know the location of gas shutoff, electrical breaker, and main water shutoff.
Expect installers to protect floors and wear protective equipment; remove pets from the work area.
Plan for temporary hot water limitations during the project.

Bottom line

A professional, code-compliant water heater installation in Garnett, KS ensures safe operation, improved energy efficiency, and reliable hot water through the cold months. Proper pre-installation assessment, correct unit selection tied to local fuel and climate factors, and meticulous plumbing, venting, and electrical work are essential for long-term performance and warranty protection.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.