HVAC Installation in Garnett, KS

Discover why customized HVAC installation is essential for Garnett properties. Improve comfort, efficiency, and air quality with expert solutions.
Parking lot with three All Seasons company vehicles—two vans and one red pickup truck—in front of a commercial building under cloudy sky.

Thinking about a new HVAC system for your home or business? It's a big step, crucial for your comfort, long-term energy savings, and even the air you breathe. Here in Garnett, KS, with our humid summers and chilly winters, having the right system—properly sized and installed—is absolutely essential. All Seasons Air Conditioning & Heating takes care of everything: thorough assessments, precise load calculations, professional installation, handling permits, and even post-install testing. Our goal is to make sure your new system works perfectly, year after year.

HVAC Installation in Garnett, KS

Why Garnett homes and businesses need a tailored HVAC installation

  • Hot, humid summers increase air conditioning runtime and can expose poorly sized systems or inadequate dehumidification.
  • Cold winters and freeze-thaw cycles put wear on furnaces and heat pumps; proper sizing prevents short cycling and premature failure.
  • Many older homes in the area have undersized or leaky ductwork, inconsistent insulation, or multi-story layouts that require zoning or duct modifications.
  • Upgrading to a modern, high-efficiency system can reduce utility costs, improve comfort, and address indoor air quality issues common with legacy systems.

Common reasons customers choose new HVAC installation in Garnett, KS

  • Existing equipment is more than 10 to 15 years old and showing frequent failures.
  • Uneven temperatures, hot/cold spots, or persistent humidity problems.
  • High energy bills despite regular maintenance.
  • Renovations, additions, or replacing a failing system after a breakdown.
  • Desire for better indoor air quality, quiet operation, or smart thermostat integration.

Initial assessment and accurate sizing

Proper installation starts with a detailed assessment of your property:

  • Home or building inspection to evaluate insulation, windows, orientation, and existing ductwork.
  • Load calculation (Manual J) to determine heating and cooling requirements based on square footage, occupancy, envelope tightness, and local climate data for Garnett.
  • Duct design and verification (Manual D) to size ductwork or identify necessary repairs and balancing.
  • Electrical and gas service inspection to confirm capacity for new equipment and determine any needed upgrades.

Accurate load calculations and duct evaluation prevent common problems like short cycling, inadequate dehumidification, poor comfort, and wasted energy.

Recommended equipment and brand options

All Seasons Air Conditioning & Heating carries and recommends modern, dependable options tailored to local needs:

  • High-efficiency central AC with variable-speed compressors for better humidity control during Garnett summers.
  • Heat pumps for homes seeking efficient year-round heating and cooling where appropriate.
  • High-efficiency gas furnaces for reliable winter comfort in colder months.
  • Ductless mini-split systems for additions, garages, or rooms without ductwork.
  • Indoor air quality upgrades: whole-home dehumidifiers, media filters, and UV air cleaners to address humidity and allergens.

Amana is a primary manufacturer offered by All Seasons, known for solid warranties and reliable performance. Equipment selection is based on your load results, budget, and long-term efficiency goals.

Step-by-step installation process

  • Pre-install planning: finalize equipment choice, order materials, secure necessary permits and schedule inspections per local codes.
  • Site preparation: protect flooring and landscaping, remove old equipment, and prepare mechanical closets or exterior pad.
  • Ductwork and electrical upgrades: modify or seal ducts, install necessary electrical circuits and disconnects, and ensure safe gas connections if applicable.
  • Equipment installation: set outdoor and indoor units, connect refrigerant lines, condensate lines, gas piping, and electrical wiring.
  • Refrigerant charging and calibration: charge to manufacturer specifications, verify correct pressures and temperatures.
  • Thermostat and controls: install programmable or smart thermostats, configure zoning systems if used.
  • Safety checks and code compliance: verify clearances, combustion air, venting, and complete required inspections and paperwork.
  • Commissioning and customer orientation: perform performance testing, demonstrate system operation, and review maintenance recommendations.
  • Permitting, code compliance and warranties

    All Seasons follows local permitting requirements and code standards for Garnett and Anderson County. Proper permitting protects safety, ensures system efficiency, and avoids future complications with insurance or resale. Typical warranty coverage includes:

    • Manufacturer warranty on major components (compressors, heat exchangers).
    • Optional extended manufacturer coverage when registered properly.
    • Installer labor warranty covering workmanship for a specified period.

    Financing solutions are available to help spread the cost of new systems; warranty terms and registration should be confirmed at installation.

    Post-installation testing and commissioning

    A professional installation includes comprehensive testing to confirm performance:

    • Temperature split and airflow tests to ensure correct deliverable BTUs.
    • Electrical load and amp draw checks to confirm safe operation.
    • Refrigerant pressure verification and leak checks.
    • Static pressure and airflow balancing, and duct leakage testing when indicated.
    • Combustion safety and venting checks for gas-fired equipment.

    These steps verify efficient operation from day one and reduce callbacks.

    Tips for long-term performance in Garnett

    • Enroll in an annual maintenance plan for two seasonal tune-ups: one for cooling, one for heating.
    • Change filters regularly and use the correct MERV rating for your system and indoor air quality needs.
    • Keep outdoor units clear of vegetation and snow, especially after winter storms.
    • Seal and insulate ductwork and attic penetrations to prevent conditioned air loss.
    • Consider a whole-home dehumidifier in homes with persistent humidity to protect comfort and reduce strain on the AC.
    • Use programmable or smart thermostats to optimize runtime and efficiency.

    Why timely, professional installation matters in Garnett, KSA correctly sized and professionally installed system delivers consistent comfort during humid summers and cold winters, lowers energy bills, extends equipment life, and improves indoor air quality. Local knowledge of Garnett weather patterns, typical home construction, and permitting needs helps avoid common pitfalls like undersized equipment, moisture issues, and code violations. All Seasons Air Conditioning & Heating applies certified technicians and industry-standard testing to deliver installations that meet performance expectations for years to come.

    Q: How long does a typical HVAC installation take?

    A: Most residential installations are completed in 1 to 2 days depending on system complexity, ductwork modifications, and permitting inspections.

    Q: Will a new HVAC system lower my energy bills?

    A: Yes. A properly sized, high-efficiency system with sealed ducts and correct controls can significantly reduce energy consumption compared to older equipment.

    Q: Do you handle permits and inspections for Garnett?

    A: Permitting and code compliance are part of a professional installation to ensure safety and meet local requirements.

    Q: How often should I schedule maintenance after installation?

    A: Annual preventive maintenance visits—one for cooling and one for heating—are recommended to keep the system operating efficiently and to protect warranties.

    Q: Can I get help choosing the right system for an older Garnett home?

    A: A full load and duct assessment identifies the best solutions, which may include duct sealing, insulation upgrades, or ductless options for problem areas.

    CLIENTS SAY ABOUT US

    Customer Testimonials

    Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.
    We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.
    Linda C.
    Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.
    Jason G.
    Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!
    Rachel P.
    They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.
    Thomas R.
    They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.
    Angie W.
    Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.
    Tara P.
    J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.
    Shannon C.
    They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩
    Danielle T.
    Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears
    Linda S.
    Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.
    Vickie

    Service Areas

    Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.
    Map of northeastern Kansas showing locations marked in Osage City, Lyndon, Pomona, Overbrook, Lawrence, Baldwin City, Ottawa, Wellsville, Gardner, Olathe, Paola, and Osawatomie near Kansas City.