Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

Pomona, KS homeowners seeking ductless comfort can rely on expert mini-split installation from All Seasons Air Conditioning and Heating to deliver precise zoning, energy efficiency, and year-round comfort. The process begins with a thorough on-site assessment and Manual J load calculation to size zones correctly. We carefully plan proper indoor and outdoor unit placement, efficient line-set routing, and compliant electrical work, followed by careful vacuuming, charging, and commissioning. Post-installation testing and homeowner orientation ensure reliable performance, while our maintenance plans protect efficiency and extend system life.

Schedule My Service

(785) 242-2602

Mini-Split Installation in Pomona, KS

Mini-split installation in Pomona, KS offers a practical, energy-efficient solution for homes that need reliable cooling and heating without the cost or disruption of ductwork. Whether you are cooling a single room, converting a finished attic, or creating zoned comfort for an older farmhouse near Pomona Lake, a properly sized and installed ductless mini-split delivers precise temperature control, lower operating costs, and improved indoor comfort — especially important in Pomona’s hot, humid summers and cold winters.

Common mini-split needs and issues in Pomona, KS

Homeowners in Pomona typically choose mini-splits for these reasons:

No existing ductwork or impractical duct retrofit in older homes.
Uneven comfort between rooms, such as a hot sunroom or a drafty bedroom.
Additions and converted spaces like garages, workshops, or finished basements.
Desire for zoned temperature control to reduce energy bills.
Need for supplemental heating in specific rooms during chilly Kansas nights.Common problems that lead to replacement or new installation include inconsistent cooling, frequent HVAC cycling, and high energy bills from running an oversized or inefficient central system.

What to expect during the initial site assessment and load calculation

A thorough installation begins with a detailed on-site assessment tailored to Pomona homes:

A technician will measure the room sizes, ceiling heights, insulation levels, window orientation, and solar exposure. Lakeside humidity and summer solar gain are factored in for accurate sizing.
A Manual J load calculation determines the exact cooling and heating capacity needed for each zone. This prevents undersizing that leaves rooms uncomfortable and oversizing that wastes energy and causes short cycling.
The assessment also checks structural options for mounting indoor and outdoor units, evaluates existing electrical service capacity, and identifies optimal refrigerant line routing to minimize visual impact and efficiency losses.

Indoor and outdoor unit placement and line-set routing

Placement affects comfort, efficiency, and appearance. Key considerations include:

Indoor unit location: mount where airflow can reach the whole zone without blowing directly on occupants. Common options: high wall units, ceiling cassettes, or floor-mounted units for slab homes.
Outdoor unit location: choose a stable, level pad with good airflow, away from windows and sleeping areas to limit noise. In Pomona, locate compressors to avoid low-lying damp spots near the lake and to keep units clear of seasonal yard debris.
Line-set routing: minimize length and bends for best performance. Conceal lines inside walls, through soffits, or in painted covers for curb appeal. Ensure proper slope for condensate drainage.
Accessibility for service: leave clearance for future maintenance and repair.

Electrical requirements and permit considerations in Pomona area

Mini-split installations must meet local electrical and building codes:

Most systems require a dedicated circuit, properly sized breaker, and a disconnect at the outdoor unit. Voltage and amperage depend on the model and number of indoor zones.
Proper grounding, surge protection recommendations, and secure conduit are part of a safe, code-compliant installation.
Local permits and inspections are typically required. Permitting ensures work follows electrical and structural codes and provides peace of mind that the installation is inspected by the authority having jurisdiction. Your installer should explain which local permits apply and coordinate inspections when needed.

Step-by-step installation and commissioning procedures

A professional installation follows a controlled process to ensure performance and reliability:

Finalize indoor unit locations and cut small access holes for line-sets and condensate drains.

Install outdoor pad or wall bracket and position the outdoor unit on a level, vibration-absorbing surface.

Run refrigerant lines, electrical wiring, and condensate drain between indoor and outdoor units using approved conduit or covers.

Braze or connect line-sets, install service valves, and pressure-test the system for leaks.

Evacuate the lines and indoor unit with a vacuum pump to remove moisture and non-condensables.

Open valves to release factory charge or add refrigerant as required, then energize the electrical circuit.

Commission the system: verify superheat/subcooling, airflow, proper operation of heating and cooling modes, and check controls and wireless remotes or smart thermostats.

Perform a final noise and vibration check and verify condensate drainage and safety controls.

Vacuuming the system and correct refrigerant charging are critical to long-term reliability; skipping these steps can lead to premature failure.

Post-installation testing and homeowner orientation

After installation, thorough testing and homeowner training are essential:

The installer will run the system through multiple modes and document measured performance: temperatures, pressures, and current draw.
You will be shown how to set temperature schedules, adjust fan speeds, use zone controls, and maintain filters.
Basic maintenance steps will be explained: periodic filter cleaning, outdoor unit clearance, and signs of system issues like reduced airflow or unusual noises.
Manufacturers’ warranty registration procedures and any installation documentation should be left with the homeowner for future service needs.

Maintenance plans and long-term care

Enrolling in a regular maintenance plan preserves efficiency and extends equipment life:

Typical maintenance includes biannual inspections, coil cleaning, refrigerant level checks, electrical tightness testing, and condensate drain cleaning.
Regular service keeps warranty conditions in good standing, preserves seasonal efficiency, and catches small issues before they become major repairs.
Maintenance plans can be tailored for multi-zone systems and include priority scheduling and negotiated service terms for repeat visits.

Conclusion — Why a professional mini-split installation matters in Pomona, KSA properly engineered and installed mini-split system brings reliable, efficient comfort tailored to the unique needs of Pomona homes: humid summers, variable winters, older houses without ducts, and rooms that need targeted heating or cooling. Accurate load calculation, careful placement, proper electrical work, diligent vacuuming and charging, and ongoing maintenance are the difference between a short-lived fix and a long-term comfort solution. With attention to local climate factors and building conditions, a ductless mini-split can deliver quieter operation, better humidity control, and noticeable energy savings for years.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.