Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

All Seasons Air Conditioning and Heating outlines a comprehensive tankless water heater installation in Edgerton, KS, from pre-installation assessment and load calculations to site preparation, venting, and commissioning. We cover professional installation steps, safety and code compliance, post-installation testing, warranty registration, and maintenance tips tailored to Edgerton's climate and water conditions. You'll understand sizing, fuel options, seamless integration with existing systems, and how proper planning with our team delivers reliable on-demand hot water and energy efficiency for local homes and long-term savings.

Schedule My Service

(785) 242-2602

Tankless Water Heater Installation in Edgerton, KS

Installing a tankless water heater in Edgerton, KS delivers on two primary homeowner goals: reliable year-round hot water and lower energy waste. With cold Midwestern winters and seasonal hard water in Johnson County, a properly installed tankless system must be sized, sited, and commissioned to handle local demands and conditions. This page explains the full installation process — from pre-install assessment and load calculation to post-install testing, warranty registration, and practical operation tips specific to Edgerton homes.

Why choose a tankless water heater in Edgerton, KS

Tankless units provide on-demand hot water and higher energy efficiency than traditional tanks when sized and installed correctly. In Edgerton, common drivers for switching include:

Reducing energy use during long cold seasons when standby loss from tank heaters compounds utility costs
Providing consistent hot water for growing households or high-demand appliances
Avoiding bulky tank installs in compact mechanical rooms common to newer suburban and rural homes

Understanding local weather, fuel availability (natural gas versus propane), and water quality factors makes the difference between a successful installation and ongoing performance issues.

Common tankless water heater issues in Edgerton, KS

Recognizing typical problems helps homeowners set realistic expectations and plan a robust installation.

Undersized unit that can’t deliver required flow at expected temperature rise
Inadequate gas pressure or undersized gas piping for high-BTU models
Poor venting or combustion air supply, especially when replacing a tank in confined spaces
Mineral buildup from hard water, reducing heat exchange efficiency
Freeze risk in exterior or minimally insulated installs during sub-freezing nights

Addressing these issues up front avoids repeated callbacks and ensures longevity.

Pre-install assessment and load calculation

A thorough pre-install assessment is the foundation of a reliable installation.

Review household hot water usage patterns: simultaneous showers, clothes washer, dishwasher, and tankless-compatible recirculation needs
Measure inlet water temperature (important in Kansas winters) and determine required temperature rise for desired outlet temperature
Calculate required flow rate in gallons per minute (GPM) for peak demand and select a unit that meets GPM at the calculated temperature rise
Evaluate fuel type options: confirm available supply (natural gas or propane) and whether existing gas piping capacity meets the unit’s BTU demand

This step includes checking the mechanical room or outdoor location for clearance, vent routing, and ease of access for maintenance.

Site preparation: venting, gas, electrical, and plumbing requirements

Site preparation adapts the home to the unique needs of tankless technology.

Venting: Determine whether the unit requires concentric PVC venting, stainless steel powered vent, or direct-vent termination. Plan routes that maintain code-required clearances and minimize long horizontal runs. Condensing units will require a condensate drain connection.
Gas: High-efficiency tankless units often demand increased gas flow. Verify line sizing and regulator capacity. In many Edgerton homes with older gas lines, upsizing may be necessary to avoid low-fire or shutdown conditions.
Electrical: Electric or gas-fired units typically need a dedicated 120V or 240V circuit for ignition, controls, and internal pumps. Ensure panel capacity and proper breaker sizing.
Plumbing: Provide accessible shutoffs, properly sized supply and return piping, and a neutralizing or drain for condensate where needed. Consider a recirculation loop or thermostatic mixing valve to manage delivery temperatures and scald protection.

Permits and inspections are part of the site preparation in Edgerton; ensure local code compliance before work begins.

Professional installation steps

A professional installation follows a consistent, code-compliant sequence:

Secure permits and confirm inspection schedule with local authorities.

Remove the old water heater and prepare the site, including reinforcing or adjusting mount points for wall-mounted units.

Modify or upgrade gas and electrical services as required, and install appropriate connectors and shutoffs.

Install venting and combustion air components per manufacturer and code requirements, sealing penetrations and maintaining clearance.

Complete plumbing connections: inlet strainers, isolation valves, union fittings for future service, and condensate/drain lines.

Program controls, set maximum temperature limits for safety, and label shutoffs and service access points.

Throughout installation, technicians verify clearances, secure mounts, and follow manufacturer torque and connection specifications.

Safety, code compliance, and Edgerton-specific considerations

Safety and compliance protect occupants and ensure long-term performance.

Adhere to local building and mechanical codes. In Edgerton, inspectors will check gas fitting, venting, combustion air, and electrical compliance.
Install or verify carbon monoxide detectors for gas units and ensure proper vent termination distances from windows and air intakes.
Address cold-weather protection: insulate exposed pipes, use freeze-resistant vent terminations when appropriate, and select indoor mounting locations or installed freeze kits for outdoor units.
If your home has hard water, plan for water treatment or a softening/scale prevention strategy to protect heat exchangers.

Proper documentation of code compliance simplifies inspections and future warranty claims.

Post-install testing and commissioning

Commissioning confirms the system performs as specified.

Conduct leak checks for all gas and plumbing joints under working pressure.
For gas-fired units, perform combustion analysis and measure flue draft to verify efficient operation and safe venting.
Test hot water delivery at multiple fixtures to confirm the unit meets the calculated GPM and temperature rise under realistic load conditions.
Validate electrical connections and control logic, including recirculation programming and safety interlocks.
Fill out manufacturer start-up checklists and register the warranty according to the manufacturer’s instructions to preserve coverage.

Keep a record of setup parameters and measured performance values for future maintenance and troubleshooting.

Warranty registration and documentation

Registering the unit and retaining installation records is essential.

Complete manufacturer warranty registration promptly after commissioning; many warranties require registration for full coverage.
Provide homeowners with installation documentation: model and serial numbers, gas line sizing, control settings, maintenance schedule, and any local permit/inspection receipts.
Note manufacturer-recommended maintenance intervals and any water treatment installed to clarify warranty responsibilities.

Tips for proper operation and maintenance after install

Simple routines extend system life and protect performance in Edgerton’s climate:

Flush the unit annually (or per manufacturer guidance) to remove mineral scale, more frequently if your home has hard water.
Use inlet filters and consider whole-home water treatment to reduce scale buildup.
Maintain clearances around the unit and periodic visual checks of vent terminations for blockage from snow, leaves, or nests.
Set maximum temperature limits to reduce scald risk and improve efficiency; lower settings reduce wear.
Program recirculation or on-demand pumps carefully to balance convenience and energy use.

Regular professional maintenance and attention to winterization keep the unit operating efficiently through Edgerton’s cold months.

ConclusionA successful tankless water heater installation in Edgerton, KS hinges on correct sizing, careful site preparation, code-compliant venting and fuel supply work, thorough commissioning, and consistent maintenance. When these elements are handled correctly, homeowners gain immediate energy savings, continuous hot water, and a reliable system built to withstand regional climate and water conditions.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.