Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

All Seasons Air Conditioning and Heating outlines a comprehensive water heater installation in Eudora, KS, covering initial assessment, unit selection, precise sizing, permits, and a step-by-step installation process with crucial safety checks. We explain tank, tankless, and heat pump options, local water considerations, and strict code compliance to ensure safe, efficient operation. Our guide details thorough post-install testing, warranty registration, first-use practices, and essential maintenance tips tailored to Eudora's hard water conditions, helping homeowners choose the right system and ensure reliable hot water year-round. A strong emphasis on safety and compliance guides all our decisions.

Schedule My Service

(785) 242-2602

Water Heater Installation in Eudora, KS

Replacing or installing a new water heater is a major home upgrade. In Eudora, KS, with cold winters and hard summertime water that increases mineral buildup, a professional water heater installation protects your home, improves energy use, and ensures safe, reliable hot water year round. This page explains the full installation process for new water heaters in Eudora, KS, including pre-install assessment, unit selection and sizing, permits and code compliance, step-by-step installation and safety checks, plus post-install testing, warranty registration tips, and first-use best practices.

Common water heater types and common issues in Eudora, KS

Conventional tank water heaters (gas and electric): common choice for lower upfront cost; susceptible to sediment buildup and reduced efficiency in hard-water areas.
Tankless (on-demand) water heaters: compact and energy efficient for households with continuous hot water needs but require proper gas line or electrical sizing.
Heat pump water heaters: highly efficient in moderate climates but need adequate space and ventilation.
Common installation issues in Eudora homes:
Scale and sediment shortening unit life due to local water hardness.
Inadequate venting or combustion air for gas units.
Improper sizing leading to cold showers or wasted energy.
Missing or incorrect expansion tank on closed domestic hot water systems.

Pre-install assessment

A thorough pre-install assessment prevents surprises on install day:

Measure the existing space, clearances, and access routes to ensure the new unit fits and can be moved into place.
Inspect the current plumbing, gas line capacity, and electrical service to determine whether upgrades are needed.
Check water quality data and history of deposits to recommend scale mitigation such as anode rod choices, softening, or descaling options.
Review local Eudora and Douglas County code requirements and determine required permits and inspections for your property.

Unit selection and sizing

Choosing the right unit is critical for performance and efficiency:

For tank models: use First Hour Rating (FHR) to match household peak demand. Typical family sizing ranges based on number of bathrooms and fixtures.
For tankless models: size by peak gallons per minute (GPM) and required temperature rise, factoring Kansas winter ground water temperatures.
Fuel source considerations: natural gas remains common for high recovery rates; electric and heat pump options offer high efficiency where electrical capacity allows.
Efficiency and lifecycle tradeoffs: consider energy factor (EF) or uniform energy factor (UEF) ratings and estimated operating cost, especially with seasonal temperature swings in Eudora.
Recommend corrosion-resistant materials and upgraded components when local water hardness is high.

Permits and code compliance

Professional installs include permit coordination and code compliance:

Typical required permits: plumbing permit for water piping changes, mechanical or gas permit for fuel connections, and a building permit when structural changes are needed.
Code compliance items commonly checked by local inspectors:
Proper venting, clearances, and combustion air for gas appliances.
Temperature and pressure relief (T&P) valve discharge piped to an appropriate safe location.
Electrical connections and bonding for electric models.
Installation of an expansion tank on closed systems where required.
Bringing installation up to code protects safety, satisfies insurance and resale requirements, and helps preserve manufacturer warranties.

Step-by-step installation and safety checks

A standard professional installation will follow these steps:

Shut off water, gas, and electrical power to the existing unit.

Drain and remove the old water heater, safely disposing of it per local regulations.

Prepare the installation area: level pad, verify clearances, and ensure proper venting or electrical access.

Position and secure the new unit; install necessary supports or seismic restraints if required by code.

Make water connections using dielectric unions or approved fittings, install expansion tank if needed, and connect T&P valve with correct discharge piping.

Connect fuel or electrical supply: gas line sizing and leak testing for gas units; dedicated circuit and proper wiring for electric or heat pump units.

Install venting and combustion air systems for gas units; ensure proper draft and termination clearances.

Refill the tank or prime the system, purge air from the lines, and verify no leaks.

Energize the unit and perform initial start-up procedures.

Safety checks performed before leaving:

Gas leak test and combustion inspection for gas units.
T&P valve operation and correct discharge routing.
Verification of thermostat settings and anti-scald considerations.
Check for leaks at all fittings under pressure and temperature.
Confirm proper venting and flue draft where applicable.

Post-install testing and commissioning

Commissioning ensures the system performs as designed:

Run a full heating cycle and verify temperature at multiple fixtures.
Measure recovery rate and confirm the unit matches the specified capacity.
Record serial numbers, model, gas pressure readings, electrical load, and as-built notes for warranty and future service.
Leave a visible installation label with set temperature and safety warnings.

Warranty registration and first-use best practices

Register the manufacturer warranty promptly using the serial number and installation date. Keep proof of professional installation to preserve extended warranties when required.
First-use tips:
Set water temperature to 120 degrees Fahrenheit to balance comfort and scald risk.
Run hot water at each fixture to purge air and check water clarity.
Observe the tank and connections during the first 24 hours of operation for any slow leaks.
Store the owner manual and installation documentation in an accessible place for future reference.

Maintenance tips and local considerations for Eudora, KS

Flush the tank annually to reduce sediment build-up caused by hard water in the region.
Inspect and replace the sacrificial anode rod every 3 to 5 years, sooner if local water chemistry is aggressive.
Test the T&P valve periodically and replace if it does not operate smoothly.
Consider water treatment options if scale buildup is a persistent issue; this extends heater life and maintains efficiency.
For gas units, schedule an annual combustion and venting check prior to winter to ensure safe operation in cold months.
Insulate hot water pipes and the first 3 to 6 feet of the tank piping to reduce heat loss and improve hot water delivery.

ConclusionA professional water heater installation in Eudora, KS ensures the right equipment is selected, installed to local code, and commissioned for safe, efficient performance. Proper sizing, attention to Kansas water conditions, permitting, and regular maintenance extend the life of your investment and keep household hot water reliable through hot summers and freezing winters.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.