Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

All Seasons Air Conditioning and Heating provides professional furnace installation in Edgerton, KS, emphasizing precise sizing, safe venting, and code-compliant workmanship. We begin with initial on-site consultations, perform Manual J load calculations, inspect ductwork thoroughly, and help you choose the right high-efficiency furnace with appropriate staging. Our detailed installation steps include removing old equipment, setting up your new unit, making secure gas and electrical connections, ensuring proper venting, sealing ducts, and integrating your new thermostat. You'll also receive safety checks, post-install commissioning, warranty documentation, a clear understanding of what to expect on installation day, and guidance on ongoing maintenance for dependable, efficient heating.

Schedule My Service

(785) 242-2602

Furnace Installation in Edgerton, KS

An accurately sized, professionally installed furnace is one of the best investments you can make for comfort and energy savings in Edgerton, KS. With cold Kansas winters and occasional subfreezing nights, homes here need reliable heat that performs efficiently and safely. This page explains the full furnace installation process—what professionals do during each step, common issues we see in local homes, and what you can expect on install day.

Why professional furnace installation matters in Edgerton, KS

A furnace that is too large, too small, poorly vented, or incorrectly installed will cost more to operate, wear out sooner, and may create safety risks. In Edgerton area homes—many with older duct systems, varying insulation levels, and natural gas service—precision matters. Proper installation delivers:

Better year-round comfort and more consistent indoor temperatures
Lower monthly energy bills through correct sizing and higher AFUE ratings
Reduced repair frequency and longer equipment life
Safe combustion and venting that protects indoor air quality

Common furnace installation issues in Edgerton, KS

Local weather and housing stock create recurring issues installers address during new furnace work:

Oversized systems that short-cycle in moderate weather, increasing wear
Undersized systems failing to maintain temperature on cold nights
Leaky or undersized ductwork that undermines efficiency
Improper flue/venting clearances in older utility closets or basements
Inadequate combustion air in tightly sealed homes
Electrical service or gas line updates required to meet code for new high-efficiency units

Initial consultation and load calculations

Professional installation always begins with an on-site consultation. A technician will:

Review your home’s layout, insulation, windows, and occupancy
Perform a heat loss/heat gain calculation (Manual J) to determine the exact heating capacity required
Inspect existing ductwork, venting paths, and utility connectionsAccurate load calculations are the foundation of a properly sized furnace. In Edgerton, where overnight lows can dip and winter storms are possible, those calculations ensure your system can maintain comfort without oversizing.

Equipment selection: choosing the right furnace

Equipment selection balances performance, budget, and home needs. Key factors include:

Capacity: Matched to Manual J results, expressed in BTUs
Efficiency (AFUE): Higher AFUE means lower fuel use over time—important in Kansas winters
Fuel type: Natural gas is common locally; electric or propane options are considered when gas service is unavailable
Staging and modulation: Two-stage or modulating burners and variable-speed blowers improve comfort and efficiency in variable weather
Brand and warranty: Selecting reputable brands and confirming warranty registration protects your investmentTechnicians will recommend models that fit both the calculated load and your priorities for efficiency, noise, and indoor air quality.

Site preparation before installation

Preparing the install site reduces surprises on install day:

Clear the work area and provide access to the furnace location, vents, and thermostat
Confirm venting routes and chimney condition if applicable
Inspect and measure duct connectors, flue clearances, and combustion air openings
Verify electrical disconnects and gas line capacityIf duct upgrades, flue repairs, or gas line enhancements are needed, those items are scheduled so installation meets code and performs optimally.

Installation procedures: step by step

A standard professional install follows these steps:

Safely disconnect and remove the old furnace and associated components

Prepare the platform, venting, and gas/electrical connections for the new unit

Set and secure the new furnace, ensuring level placement and proper clearances

Connect gas piping with approved fittings and pressure-test for leaks

Install or adapt venting/chimney connectors with correct slope and sealing

Seal, insulate, and reconnect ductwork with proper transition pieces

Wire the furnace controls and integrate with the thermostat and any zone controls

Install combustion air provisions when required for safe operationThroughout this process technicians maintain protection for floors and home surfaces and manage debris removal.

Safety and code compliance checks

Safety and code compliance are nonnegotiable. Technicians verify:

Proper venting and draft for combustion products
Carbon monoxide safety and clearance requirements
Gas pressure and shutoff valve placement per local code
Electrical connections and grounding meet NEC standards
Permits and inspections are obtained when required by local authoritiesThese checks protect occupants and ensure the system is eligible for manufacturer warranties and local compliance.

Post-installation testing and commissioning

Commissioning confirms the system performs as intended:

Start-up sequence and burner ignition checks
Measured airflow, static pressure, and thermostat calibration
Combustion efficiency and carbon monoxide readings
Safety control validation (limit switches, pressure switches, rollouts)
Balanced room-by-room temperature verificationTechnicians will document readings and explain results, leaving you with written recommendations for optimal settings and maintenance.

Warranty registration and documentation

After installation professionals will:

Complete manufacturer warranty registration on your behalf where applicable
Provide installation records, equipment manuals, and maintenance guidelines
Explain warranty terms, required maintenance tasks, and service intervalsProper documentation keeps warranties valid and makes future service straightforward.

What to expect on install day in Edgerton

A typical install day in Edgerton includes:

Arrival by uniformed technicians with tools, materials, and protective coverings
A brief walk-through of the project scope and any last-minute discoveries
Removal of the old system, installation of the new furnace, and final clean-up
Testing and demonstration of operation, thermostat setup, and comfort tipsInstall timelines vary by job complexity but are managed to minimize disruption to your household.

Long-term benefits and maintenance advice

A professionally installed furnace delivers consistent warmth, lower energy use, and improved indoor air quality. To protect that investment:

Schedule annual heating Tune-Ups before winter to verify efficiency and safety
Replace or clean filters regularly (more often during high-use months)
Keep vents and returns clear and maintain good thermostat settings
Address duct leaks or insulation gaps that reduce system performanceIn Edgerton’s climate, proactive maintenance prevents mid-winter failures and preserves manufacturer warranties.

A correct furnace installation is a combination of accurate sizing, experienced workmanship, code-compliant venting, and thorough testing. For Edgerton, KS homes, those elements translate directly to dependable warmth, safer combustion, and more efficient operation throughout the cold season.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.