Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

All Seasons Air Conditioning and Heating outlines professional furnace installation in Richmond, KS, guiding homeowners through every stage from initial site assessment to post-install support. We emphasize correct sizing using Manual J calculations, thorough ductwork evaluation, and proper venting to ensure safe, efficient heat during Kansas winters. Our process covers permit acquisition, meticulous start-up testing, and crucial warranty registration, with valuable tips for avoiding common installation pitfalls. Readers gain clarity on scheduling, warranty protection, and the ongoing maintenance needed to keep a new furnace performing reliably for years to come with our expert team.

Schedule My Service

(785) 242-2602

Furnace Installation in Richmond, KS

Installing a new furnace is one of the most important investments you can make for year-round comfort and safety in Richmond, KS homes. With cold Kansas winters, temperature swings, and older housing stock in and around Richmond, a properly planned and executed furnace installation ensures reliable heat, efficient operation, and safe combustion for your household. This page walks through the full installation process—from site assessment and correct sizing to start-up testing, warranty registration, and post-installation support—so you know what to expect and how to avoid common installation pitfalls.

Why professional furnace installation matters in Richmond, KS

Richmond experiences cold, sometimes prolonged winters where a furnace must handle heavy heating loads. Improper installation is a leading cause of early equipment failure, poor comfort, higher energy bills, and safety risks like carbon monoxide exposure. Professional installation that follows local Richmond and Franklin County permit and code requirements ensures:

Safe fuel and venting connections for gas or propane systems
Correct equipment sizing to handle Kansas winter design temperatures
Proper airflow and ductwork performance in older or newer homes
Compliance with local building inspections and manufacturer warranty terms

Common furnace installation issues in Richmond, KS

Incorrect sizing (oversized systems short-cycle or undersized systems struggle in extreme cold)
Undersized or leaky ductwork common in older Richmond houses, reducing delivered heat
Improper venting or combustion air routing for high-efficiency models
Lack of permit submission or failed local inspection due to code noncompliance
Poor thermostat placement or control wiring errors causing uneven temperatures

Site assessment and pre-installation planning

A thorough installation begins with a detailed site assessment tailored to Richmond homes:

Evaluate the existing heating system, duct layout, and equipment access
Inspect flue, venting, combustion air availability, and clearances
Review utility type (natural gas, propane, or electric) and meter capacity
Identify restrictive crawlspace or attic access that can affect installation approach
Discuss homeowner priorities: efficiency, budget, indoor air quality features, and long-term plans

A professional will use this assessment to recommend appropriate furnace models and necessary duct or venting improvements.

Correct sizing and load calculation

Accurate sizing is critical. Installers should perform a heat load calculation (Manual J) that considers Richmond-specific factors:

Local design temperatures and insulation levels
Home orientation, window types, and infiltration rates
Recent upgrades like added insulation or replacement windows

Correct sizing prevents short cycling and ensures the furnace can maintain comfortable indoor temperatures during Kansas cold snaps.

Ductwork considerations for Richmond homes

Duct condition can make or break system performance. Key ductwork tasks included in a quality installation:

Duct evaluation for leaks, insufficient insulation, or restrictive turns
Recommendations for sealing (mastic or UL-rated tape) and insulating exposed ducts
Return and supply sizing adjustments to meet required airflow
Adding or relocating supply registers for balanced, comfortable heating
Installing or adjusting zoning components if needed for larger or multi-level homes

Addressing duct issues during installation improves comfort and system efficiency immediately.

Professional installation steps

A standard professional installation follows a predictable, code-compliant sequence:

Pull required Richmond and Franklin County permits and schedule inspections if applicable
Safely disconnect and remove existing furnace and associated components
Prepare the installation area, including support pad or platform and vent/combustion air preparation
Set and secure the new furnace, connect gas or electrical services, and configure venting or condensate piping for high-efficiency units
Integrate with existing ductwork or install recommended duct modifications
Install or rewire thermostat, zone controls, and any smart control interfaces
Ensure proper drain, access to filters, and clearance for future service

Each step follows manufacturer instructions and local code to preserve warranty coverage and ensure safe operation.

Permit, code compliance, and inspection

Furnace installations in Richmond must comply with state and local codes. Typical compliance steps include:

Filing permit applications with the city or county building department
Passing gas line, combustion air, and venting inspections where required
Adhering to electrical code when new wiring or breakers are installed
Documenting work per manufacturer requirements for warranty eligibility

A licensed installer will manage permitting and coordinate inspections so installations meet regulatory standards.

Start-up, performance testing, and safety checks

After installation, a professional technician conducts comprehensive start-up and testing to verify safe and efficient operation:

Leak check of gas piping and connections
Combustion analysis and CO testing for fuel-fired equipment
Measurement of static pressure and airflow to confirm proper distribution
Temperature rise test to verify furnace operates within manufacturer specifications
Electrical verification and thermostat calibration

These tests confirm the system is safe, efficient, and tuned for Richmond winter conditions.

Homeowner orientation and warranty registration

Before leaving the home, the installer should provide a clear orientation that covers:

How the furnace operates and recommended thermostat settings for comfort and efficiency in Kansas winters
Filter types, replacement frequency, and how to change filters safely
Basic troubleshooting steps and safety warnings, including carbon monoxide alarm placement
Review of installed ductwork changes and access points for maintenance
Guidance on registering the manufacturer warranty and any installer labor warranty documentation

Proper orientation and warranty registration protect your investment and make future support straightforward.

Post-installation support and maintenance advice

Reliable post-installation support keeps your furnace running well through Richmond’s heating season:

Schedule an annual Tune-Up that includes combustion testing, filter checks, and safety inspections
Consider a maintenance plan that provides priority service during cold weather
Monitor filters and replace them regularly; many Richmond homes benefit from higher MERV filters for better indoor air quality
Keep combustion air vents and furnace closet clear of storage and debris
Install and maintain carbon monoxide detectors near sleeping areas and the furnace

Regular maintenance preserves efficiency, extends equipment life, and reduces the risk of emergency breakdowns on the coldest nights.

Benefits of a properly installed furnace in Richmond, KS

A professionally installed furnace delivers tangible advantages for Richmond homeowners:

Consistent, reliable heat during Kansas winters
Lower energy usage and reduced utility costs with correct sizing and sealed ductwork
Improved indoor air quality and comfort through proper airflow and filtration
Compliance with local codes and manufacturer warranty protection
Increased safety with correctly routed venting and verified combustion performance

A well-executed installation is more than swapping equipment; it is a system-level improvement that supports comfort, safety, and long-term value for your home.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.